Lease Expiry not shown (n/a) › Forums › Desktop Info › Lease Expiry not shown (n/a) Tagged: networkinterfaces This topic has 1 reply, 1 voice, and was last updated 8 months, 2 weeks ago by Glenn. Viewing 1 reply thread Author Posts 30 November, 2019 at 10:29 pm #2347 Juergen Desktop Info v126.96.36.19995 does not show the “First Lease Expiry” anymore, it returns “n/a”. But it works fine in v188.8.131.529 to replicate: NETWORKINTERFACES=active:1,interval:30,color:22dddd,operstatus:1,iftype:6 71,display:Type: %2|IP Address: %8 / %10|Netmask: %9|Description: %3|Gateway: %17|MAC Address: %4|DNS Server: %15|DHCP Server: %19|Lease Expiry: %14 best regards Juergen 0 1 December, 2019 at 8:01 am #2348 GlennKeymaster In v1.15 I added “multiple ip addresses” support to NETWORKINTERFACES. Have you checked to see if the interface has more than one ip? add the “ipv4list:%8/%10|” option and %25 to the display template. It may be there is no lease on the interface you’re looking at and v1.14 is misinterpreting the data. Have you tested on different computers in different networks? I notice %14 is working here on wifi and ethernet but not on cellular interfaces. 0 Author Posts Viewing 1 reply thread The topic ‘Lease Expiry not shown (n/a)’ is closed to new replies.